Realmuto Furniture Works

Foil Furniture

May
29

Resin on one side penetrates into the surface of the plate, on the other hand is squeezed out and hardens, creating a decorative and protective layer. This provides a strong connection plates and paper, and is the face of the lamination. This process is completely absent adhesive. Lamination plates are usually made in factories chipboard or large furniture factories. These factories make the lining plate has a specific size, according to customer's specification, which allows production of elements furniture lined edges. In this case, there is no product in the joints between the front surface and edges. Italian manufacturers are widely used for the production of laminated boards or create furniture composition, where the carcass and fronts are made of a laminate, as part of the facades are made of veneer.

Plastic Alternative names: Plastic surface, lining paper and laminate, layered polymer plastic. It is used in the manufacture of: Frame furniture and kitchens, kitchen fronts, countertops, tables. General characteristics. Paper Laminates are produced by hot pressing layers of paper impregnated with resins. The thickness of the plastic depends on the number of layers of paper sheets. The external decorative layer is made of high-quality monochrome paper or paper with a printed pattern. The inner layers are made of kraft paper.

In the present expensive plastic hard protective outer layer of transparent overlay paper impregnated with resin. Properties: high hardness and strength, resistance to temperatures and detergents; Water resistant. Furniture made of plastic, usually has a straight form, without recesses. The process of lining. For particleboard glued paper and laminate and cured under pressure. Painted MDF Alternative names: MDF coated with enamel. It is used in the manufacture of: Facade and kitchen furniture, cabinets, backs beds, bath, table tops, frames the elements of upholstered furniture. General characteristics. The quality and environmental painted MDF used affect the enamel, varnish and paint conditions. For painting of furniture Italian factories produce polyurethane enamel specifically designed for residential applications. Properties. If you are painting quality materials used, the result has a high moisture-resistant MDF, temperature resistance and moderate resistance to mechanical damage (scratches). The process of lining: Preparation surface of the MDF Multiple coats of primers; Painting polyester or polyurethane enamel Clearcoat and polishing. Film MDF : Film MDF, Foil. It is used in the manufacture of: Facades of kitchens and furniture. General characteristics. PVC film – a film based on polyvinyl chloride. PVC film is made only of rigid PVC which contains no volatile plasticizers. Material properties: Good moisture resistance, moderate resistance to mechanical and thermal effects. Long-term thermal effects (lights, leaky oven, kettle, which is overlooked not use) can lead to damage to the facade. The process of lining. The polymer film is pressed on the wood stove, where glue coating. The process is carried out in a vacuum press. When the temperature effects of the film is heated, stretches and fits snugly to the surface of MDF. Conclusion If the furniture is chosen for the living room, the inner material (the basis of structural elements) from a practical point of view is not so principled. From the standpoint of sustainability and durability of the more important is the quality of coating and processing quality of the edges. Therefore, it is for lining the edges and in the Italian furniture industry subject to special requirements. Italian furniture is made with all these standards, in particular, and explains the confession, which she won by consumers in Europe and the USA.

News , Comments Off on Foil Furniture

Built Woodburning Fireplace

Apr
05

If you really want to enjoy the warm room in winter, we recommend you opt for the built-in fireplace insert. This type of fireplace is designed for indoor installation in residential premises. When burning wood fuel is not any dangerous emissions. The main advantage of wood-burning fireplace inserts is that they easily fit into any decor. They are easy to install and are designed so that would avoid the need to rebuild the whole house for them. As with other types of wood-burning fireplaces, inset helps improve the look of your interior. With this insert you can also improve the efficiency and prescribed fire, if you are not satisfied with his performance.

46-inch gas fireplace with a direct form, designed for mounting on a wall, out of 46 – 12 inches of visual space for the contemplation of the flame. With a depth of 8 inches, gas fireplace creates a wonderful look and saves space in the room, the fireplace is as easy and economical to install. Ventilation communication can be carried out through the roof as premises, and through the outer wall of the fireplace to the installation site and do not require large cuts. Gas Fireplace Vent Slim 46 is designed as a flat screen enamel, stainless steel. The shape of the flame burning fireplace reminiscent of a tape.

Office of the intensity of the combustion flame gas fireplace is possible due to built-in fully programmable thermostat. The wood in the fireplace burn for much longer in comparison with similar types of fireplaces at the expense of all construction and all of the same firebrick. In the fireplace is built ceramic wall from the company Phazer, which adds structural strength and ensures a longer service life of the fireplace. Additional fan built-in fireplace, with variable speed control allows you to control the heat into the room. In the model of the fireplace NZ-26WI also the possibility of connecting the central heating system at home, increasing effectiveness of the entire heating system at home and increasing comfort.

News , Comments Off on Built Woodburning Fireplace

Spanish Furniture Panamar, Vicent Montoro At Wholesale Prices

Jan
07

Company 'Finamar: Spanish Furniture' offers the lowest retail prices in Moscow furniture factories leading Spanish Panamarev (Panamar); Finamar (Finamar), Mobaks (Mobax), Vicente Montoro (Vicent Montoro). Factory MUEBLES PANAMAR SL was founded in 1973 and deals with the most beginning of the production and sale of individual pieces of furniture in the classic, neoclassic and modern style. Infrastructure factory occupies 30,000 m2 of which 24.000 m2 are allocated to the production of our products and the remaining 6,000 m2 designed as a warehouse, which is available virtually complete range of catalog in all standard colors that can meet the needs of our partners on our product quality, and speed execution of orders. Continuous improvement of quality-price ratio allowed MUEBLES PANAMAR SL to become one of the leading Spanish manufacturers of auxiliary furniture, with a large share of exports of its products and plans to increase it in coming years. In the 90s there was a demand for furniture made of solid pine and in 1995 the company was born MUEBLES FINAMAR SL, range is constantly expanded and supplemented. Currently in production based on a modular program and hallways. We develop our own designs in such lines as commodes, consoles, mirrors, coffee tables, cabinets and TV Hi-Fi, obuvnitsy, offices, secretaries at the highest possible quality. Range increased with each year, both through new models, and by the appearance of new lines.

For our production we use materials produktsiimy top quality beech own dry, natural veneer cherry, walnut, wheat. In the manufacturing process uses the latest technology with digital control for quick and more efficiently the execution of orders. Our products are hand picked and then passes control to lakopokraskoy to ensure quality of materials used. To ensure the quality of the process we use lakopokraski the latest technology, "Cabin Pressure" to maintain humidity, cleanliness and a constant temperature regardless of the time , at all stages of the process of drying of our products. The Spanish factory Mobaks (Mobax): wall units, bedrooms, hallways, cabinets, dressers, coffee tables, cabinets, windows, corner windows, living room, mirrors, hangers, racks, bookshelves cabinets, chests, tables, dining, desks, library chairs.

Elite Spanish furniture factory Vicent Montoro, made of solid wood and natural wood veneer: walnut, olive, beech, ash, cherry and other pulsatile The factory is famous for his skilful handling of the tree and creating beautiful textures and interesting patterns that led to the Spanish elite furniture Vicente Montoro, resembling more the art, rather than just furniture. Cover varnish, as well as gold leaf are applied by hand with a pattern that gives each model, exclusivity and uniqueness. The factory has always been famous for handmade artists and craftsmen. Color: (nut – Leg – Nogal – Walnut), (walnut root – rais – Raiz), (cherry – in – Serezo – Cherry), (mahogany – Caoba – Mahogany), (ivory-blanco-wite) As well as a joint Russian-Spanish enterprises' Dana '(Dana): a series of' Paris '(Paris),' Vienna '(Viena),' Atlanta '(Atlanta),' Empire '(Imperia). Free shipping firm, lift. Warranty – 2 goda.Vsegda everything is available, payment for the furniture upon delivery and sborki.Dostavka and Build is made within 1-2 working days, or by the zakazchika.Prodazha from a warehouse in Moscow without a trade margin, wholesale, retail, delivery in Moscow and St. Petersburg, the shipment to the regions.

News , Comments Off on Spanish Furniture Panamar, Vicent Montoro At Wholesale Prices